Important Safety Guide
Please observe the following safety precautions when you use the machine:
Read all Instructions before Using
Warning: please adhere to the following instructions to reduce the risk of injuring people:
1. Don’t use the foot spa massager without water. Unplug the power cord after using it;
2. Don’t directly pull water higher than 45°C into the tank to avoid scalding feet or deforming the massager;
3. When cleaning the foot bath massager, don’t immerse it in the water or spray it with water. Please pour the water out, and wipe it with a rag;
4. If the power cord is damaged, please repair it at the maintenance center or replace it with the assistance of professional personnel;
5. Please dry your hands before touching the switch or power plug;
6. Please stop using the foot spa basin if you feel uncomfortable (like dizziness, headache). Children or people who are insensitive to temperature shall use the massager with others’ help;
7. People with severe heart disease, diabetes, thrombus or cerebral hemorrhage, the pregnant and people who have lost consciousness to temperature are not recommended to use the foot spa tub or shall counsel their doctor;
8. People suffering from inflammation or trauma in the feet or skin scald, or people who are lame or pregnant are not recommended to use our foot spa massager;
9. Please clean the drainage filter in a timely manner to avoid clogging and damage of the foot bath massager;
10. When using the massager, any hair, flocculent substance, herb residue, etc. may result in its breakdown;
11. Please stop using the foot spa basin if any leakage occurs.
Maintenance Instructions

1.Do not store water in the foot spa tub, and don’t use it for other purposes.

2.Do not use cleaning agents with corrosive property to clean this foot spa massager.

3.Do not clean the foot bath massager by spraying water or immersing it in water. If you want to clean the outer surface of the machine or power line, only wipe it with a damp cloth and detergent.

4.Please clean the foot spa basin after using it every time. Be sure to clean the air jet hole to avoid blocking pores and resulting in dysfunction of bubbles.

5. Drain the water and unplug the power plug after using the foot spa tub each time.

6. Please pay special attention to cleaning the sediment in the center of filter net to avoid damage to the machine.

7. Please keep the foot spa massager at a dry place after cleaning. Do not hang it or put it upside down. Do not put the foot bath massager in the bathroom or any other damp environment.
Simple Troubleshooting
|
Problems
|
Inspection method
|
Solution
|
|
Massager doesn’t heat
|
Power is not connected
|
Check if the power is connected
|
|
Massager doesn’t work
|
Forget to start the program after connecting the power
|
Read the operation manual carefully and use it correctly
|
Specifications
|
Model
|
MM-01E
|
|
Power (W)
|
500
|
|
Voltage (V)
|
220
|
|
Frequency (Hz)
|
50
|
|
Waterproof Rating
|
IPX4
|
|
Appliance Class
|
Double insulated
|
Structure and Parts
|
|
1. Switch
|
2. Massage node
|
3. Massage roller
|
4. Handle
|
|
5. Infrared
|
6. PTC
|
7. Herbal diffuser
|
8. Brake wheel
|
Operation Instructions
1. This product has passed the test of electrical safety, performance and other related parties.
2. Please read the manual carefully before using the foot bath massager.
3. People who have serious disorders should use the foot spa basin with the accompany and help of others.
4. TallKee shall not be responsible for the damage resulting from any improper use or incorrect repair.

Pulling, dragging or hanging the power line is prohibited to avoid damaging it.

Horizontally place the foot spa basin after using it.

Prohibit using the foot spa tub without water. Please unplug the power plug after using it.
Please check the foot spa massager carefully before using it, and please don’t use the machine in the following situations:
|
|
Power line is damaged
|
The massager is obviously damaged
|
The massager drops to the ground
|

Please do not use the foot spa massager in the bathroom, swimming pool or other moist environment. Do not use it on the plush carpet.

STOP using the foot bath massager if you feel uncomfortable (such as dizzy, headachy, and other phenomena) when using the massager.

Be sure the power line and plug are dry when using the massager. Keep them away from heat source.

People with severe heart disease, diabetes, thrombus or cerebral hemorrhage, the pregnant and people who have lost consciousness to temperature are not recommended to use the foot spa basin or shall counsel their doctor;

Do not stand up or jump, or put heavy goods into the basin when the machine is working.

Don’t directly pull water higher than 45°C into the tank to avoid scalding feet or deforming the massager.

People suffering from inflammation or trauma in the feet or skin scald, or people who are lame or pregnant shall not use the foot spa tub.

Do not add acidic, alkaline, corrosive or flocculent substances or particles into the herbal diffuser when using this foot spa massager.

Do not use the foot bath massager within 30 minutes before or after massaging. 40 minutes is recommended for each massaging.
Methods and Steps
1. Put the massager flat on the ground and add water into it (35°C is recommended to reduce your waiting time and avoid scalding).
2. Connect the power source (220V/60Hz).
3. Press the power button. The left side of the display shows the water temperature and the right side shows the time. The default time of massaging is 30 minutes.
4. Adjust the temperature by pressing "Heat Up” or "Cool Down”. The foot spa tub will send you a alarm sound when the temperature reaches your setting (the default temperature is 45°C, and the highest temperature is 50°C). The system will automatically stop when the temperature is higher than 52°C.
5. Set your massaging time with the minimum time coming to 10 minutes, and the maximum time reaching 60 minutes.
6. Press the "Infrared/Massage” button to start the infrared or massage function. Press the same button again to stop such function.
7. Press the "Bubble” button when you need. Press the same button again to stop such function.
Related Products